Skip to content
foundation Wall Hacking.sg

location_on North East

Wall Hacking Services in Sengkang

Wall hacking, floor hacking and reinstatement for HDB flats and condominiums across Sengkang.

Hacking works in Sengkang

Sengkang grew quickly through the late 1990s and 2000s, so most flats we hack here are between fifteen and twenty-five years old. That age bracket matters. The units are new enough to use lightweight partition walls in the bedrooms, but old enough that the original bathroom waterproofing is reaching the end of its service life. When a Sengkang owner asks us to hack bathroom tiles, we assume the membrane underneath will need to be redone rather than patched.

What we see in these flats

The common request in Anchorvale and Compassvale is opening the kitchen to the living area. In the four-room layouts used across much of Sengkang, the kitchen wall is usually non-structural for most of its length, with a structural return near the service yard that has to stay. We mark that return on site before quoting so there is no confusion about how wide the opening can be.

In the older Rivervale blocks we more often get floor hacking, where the original homogeneous tiles are lifted for new flooring. Those slabs take screed well, but the debris volume is higher than owners expect and we plan the disposal trips around the town council's bulk removal window.

Working around the estate

Lift access is straightforward in Sengkang because the blocks are relatively new and the service lifts are sized for renovation work. The constraint is timing rather than access: these are dense family estates and the noisiest part of any hacking job is best finished early in the permitted window rather than stretched across the full day.

Estates we cover in Sengkang

  • apartment Anchorvale
  • apartment Compassvale
  • apartment Rivervale
  • apartment Fernvale
  • apartment Jalan Kayu

info Working in Sengkang

Sengkang blocks are served by the LRT loop and most have basement or multi-storey carpark access. Town council here asks for the renovation permit to be displayed at the unit door for the duration of the works, and lift padding is usually booked through the management office a few days ahead.

Services available in Sengkang

Hacking works in Sengkang

Do I need HDB approval before hacking a wall?

add
Yes. All hacking of walls in an HDB flat, whether partial or complete, needs written approval from HDB before works begin. This is issued as a renovation permit. Works carried out without a permit can result in a fine and an order to reinstate the wall at your own cost. We apply for the permit on your behalf as part of the job.

Which walls in my flat can be hacked?

add
Non-structural walls can usually be hacked with approval. Structural walls, reinforced concrete walls, columns, beams and household shelters can never be hacked. In most HDB flats the walls around the household shelter and certain internal walls are structural. We confirm which is which from your floor plan before quoting, and flag anything that will not be approved.

What hours can hacking works be carried out?

add
Noisy works such as hacking and heavy drilling are restricted to weekdays, generally 9am to 5pm. They are not permitted on Saturdays, Sundays or public holidays. Quieter renovation work has a wider window. We schedule hacking inside the permitted hours and plan low-noise tasks around them so the job still finishes on time. Check the current hours with HDB or your building management before fixing dates, as the rules are periodically updated.

How long do hacking works usually take?

add
A single wall opening in an HDB flat is often a one-day job. A full flat strip-out including floor tiles, bathroom and kitchen typically runs three to five working days. Commercial reinstatement depends on floor area and what has to come out, and we give you a day-by-day programme with the quotation.

Do you clear the debris afterwards?

add
Yes. Debris removal and disposal at licensed facilities is included in our scope unless stated otherwise. We sort waste on site where required, protect common corridors and lifts during removal, and leave the unit swept clean at the end of works.

Do you work with interior designers and renovation contractors?

add
Regularly. We are often engaged directly by interior design firms and main contractors to handle the hacking and disposal phase before their own works begin. We can work to your programme and coordinate access with the other trades on site.

Get a site survey for your hacking works

Send us your floor plan or a few photos and we will advise what can be hacked, what needs a permit, and how long the works will take.