Skip to content
foundation Wall Hacking.sg

shelves Hacking Services

Built-in Carpentry and Wardrobe Removal in Singapore

Wardrobes, kitchen cabinets, shelving, feature walls and platforms dismantled, with wall touch-up and licensed disposal.

Carpentry dismantling in Singapore covers the removal of built-in wardrobes, kitchen cabinets, shelving, TV consoles, feature walls, platforms and other fixed joinery. It is usually the first step of a renovation, before any tiles or walls are hacked, and it produces more volume than most people expect. We take carpentry apart in sections rather than smashing it out, touch up the walls left behind, and dispose of everything at licensed facilities.

What we remove

Any fixed joinery in a home or commercial unit, including:

  • Built-in wardrobes, walk-in wardrobes and shoe cabinets
  • Kitchen top and bottom cabinets, tall units and countertops
  • Bookshelves, display shelving and study tables
  • TV consoles and feature wall panelling
  • Platform beds and raised platforms
  • Vanity cabinets and mirror cabinets
  • Reception counters, pantry cabinets and storage walls in offices and shops

Kitchen removal often goes together with tile and floor hacking; see kitchen hacking and dismantling.

Kitchen cabinets

Kitchen cabinets take more care than wardrobes, because they sit around water, gas and electrical points.

Before removal, the sink and tap are disconnected and the water supply isolated, the hob and oven are disconnected (gas appliances by a licensed gas worker), and appliances are moved out. Countertops, especially stone, are heavy and are removed in sections with care. Behind the cabinets you often find the tiles stop short, so if you are re-tiling or hacking the kitchen walls at the same time, it is usually best to plan both together.

Dismantling, not smashing

Taking carpentry apart in sections is slower on paper but better in practice.

It is quieter, produces less dust, protects the walls and floors around it, and generates debris that can be sorted. It also means any item you want to keep, such as a good set of drawers or a countertop, can come out intact. Breaking carpentry up is faster for an hour and worse for everything that follows, including the clean-up.

Wall and floor touch-up

Built-ins leave fixings, holes and unfinished patches behind. We remove the fixings and fill the holes so the surface is ready for the next trade.

Behind a wardrobe or kitchen cabinet you often find unpainted wall, gaps in the floor tiles where the carcass sat, or old wiring and pipe points. We point these out at handover so your painter, tiler or electrician knows what to expect.

Disposal

Carpentry is bulky. A single fitted wardrobe fills far more space on a lorry than it appears to in the room.

Timber and board are separated from metal fittings, glass and general waste, and taken to NEA-licensed disposal facilities. Published market ranges for a single small-lorry trip, including labour and compliant disposal, are about S$300 to S$500, and for haulage and debris clearance across a whole job about S$500 to S$1,500. A full flat strip-out usually needs more than one trip.

A recent job

In an HDB flat strip-out, we removed built-in wardrobes, shelving and feature wall panelling, along with the floor tiles, from a flat the owners were still living in. Plywood wall protection and floor foam went in before any work started, debris was sorted on site, and the flat was swept clean with all protection removed at handover. The job took six days.

Before we arrive

A few simple steps make carpentry removal faster and cheaper.

  • Empty every cabinet and wardrobe. Clothes, books and kitchenware left inside slow the crew and risk being thrown out.
  • Mark what stays. Tape or label any item, shelf or fitting you want to keep.
  • Move fragile and valuable items out of the room, or tell us so they can be protected.
  • Check building rules. Condominiums may need an application and set hours for moving debris.
  • Book the next trade. A stripped room is best followed quickly by the hacking, electrical or carpentry work it was cleared for.

Carpentry removal with other hacking works

Carpentry dismantling is usually the first stage of a bigger job. When it is combined with wall, floor, kitchen or bathroom hacking in one mobilisation, protection, permits and disposal trips are shared, and the whole strip-out finishes sooner. Our dismantling and disposal service covers fixtures and fittings beyond carpentry.

Pricing

Carpentry dismantling is priced by the items and their volume, plus disposal, after we have seen them or good photos.

The main factors are how many units there are, how they are fixed, whether anything is being kept, and how many lorry trips the debris needs. For other job types, see the hacking price list. Request a quote with photos of each item.

How we carry out the works

  1. 1

    Survey

    Confirm which items go, which stay, and what is fixed to walls, floors and ceilings.

  2. 2

    Protect

    Lay floor protection and wall boards along the work area and the route out.

  3. 3

    Dismantle

    Take carpentry apart in sections, removing doors, shelves, carcasses and fixings in order.

  4. 4

    Touch up

    Remove fixings, fill holes and patch the surfaces left behind, ready for the next trade.

  5. 5

    Clear

    Sort and remove debris to licensed facilities and leave the room swept.

check_circle What is included

  • check Dismantling of agreed built-in items
  • check Floor and wall protection
  • check Removal of fixings and filling of holes
  • check Debris sorting and licensed disposal
  • check Swept room at handover

cancel Not included

  • remove Repainting
  • remove Re-tiling behind removed units
  • remove Plumbing and electrical disconnection beyond simple isolation
  • remove Reinstallation of salvaged items

Carpentry and Wardrobe Removal questions

Can you remove carpentry without damaging the walls?

add
We dismantle carpentry in sections and remove the fixings carefully, which keeps wall damage to a minimum. Some marks and holes are unavoidable where units were fixed; we fill these so the wall is ready for painting.

Can I keep some of the carpentry?

add
Yes. Tell us which items you want to keep and we will dismantle them carefully. Items taken apart in sections can often be reinstalled; items that were glued or built in place may not survive removal intact.

Do I need a permit to remove a wardrobe or kitchen cabinets?

add
Removing loose or built-in carpentry on its own does not usually need an HDB permit. Hacking tiles, walls or screed behind them does. Condominiums may still require an MCST application for any renovation works.

Is disposal included?

add
Disposal is listed in every quote. Published market ranges for a single small-lorry trip with labour and licensed disposal are about S$300 to S$500.

Get a site survey for your hacking works

Send us your floor plan or a few photos and we will advise what can be hacked, what needs a permit, and how long the works will take.