Skip to content
foundation Wall Hacking.sg

roofing Hacking Services

False Ceiling and Cornice Hacking in Singapore

Ceiling and bulkhead removal with concealed services isolated before work begins.

Ceiling and bulkhead removal

False ceiling hacking covers taking down suspended ceilings, bulkheads, cove lighting details and wall cornices. It is less dusty than floor hacking but carries a different risk: almost everything concealed above a false ceiling is a service of some kind.

What is usually above

  • Electrical conduit and junction boxes
  • Lighting circuits and driver units
  • Air conditioning refrigerant piping and condensate drainage
  • Ducting for ventilation
  • Occasionally water pipes

These have to be identified and isolated before the ceiling comes down. Condensate drainage is the one most often damaged, because it is small-diameter pipework laid to a shallow fall and easy to knock out of position. A displaced condensate line produces a leak that appears some distance from where the damage was done.

Air conditioning

Where fan coil units sit within the ceiling void, removing the ceiling exposes them. If the system is being retained, the units and their pipework need protecting and supporting. If it is being replaced, the refrigerant must be recovered by a competent person before anything is disconnected, rather than released.

Cornices and cove details

Plaster cornices and cove lighting details are usually fixed to both wall and ceiling. Removing them takes some of the surface with them, so making good is part of the job rather than an extra.

Structural ceilings are different

A false ceiling is a suspended layer below the structural slab. The slab itself cannot be cut into or altered. If what you are looking at is the underside of the slab rather than a suspended ceiling, there is no ceiling to remove.

Working at height

Ceiling work is done from platforms or ladders, which constrains how much floor area can be worked at once and how debris is handled. Material comes down in sections rather than being pulled down in bulk.

Approval

Removing a false ceiling does not usually need a renovation permit, since it is not part of the building structure. Where the work extends to altering services, separate requirements may apply. In condominiums, MCST rules generally apply to any renovation work regardless of permit status.

For typical market prices across walls, floors, toilets, kitchens, ceilings and disposal, see our hacking price list.

False Ceiling and Cornice Hacking questions

Do I need HDB approval before hacking a wall?

add
Yes. All hacking of walls in an HDB flat, whether partial or complete, needs written approval from HDB before works begin. This is issued as a renovation permit. Works carried out without a permit can result in a fine and an order to reinstate the wall at your own cost. We apply for the permit on your behalf as part of the job.

Which walls in my flat can be hacked?

add
Non-structural walls can usually be hacked with approval. Structural walls, reinforced concrete walls, columns, beams and household shelters can never be hacked. In most HDB flats the walls around the household shelter and certain internal walls are structural. We confirm which is which from your floor plan before quoting, and flag anything that will not be approved.

What hours can hacking works be carried out?

add
Noisy works such as hacking and heavy drilling are restricted to weekdays, generally 9am to 5pm. They are not permitted on Saturdays, Sundays or public holidays. Quieter renovation work has a wider window. We schedule hacking inside the permitted hours and plan low-noise tasks around them so the job still finishes on time. Check the current hours with HDB or your building management before fixing dates, as the rules are periodically updated.

How long do hacking works usually take?

add
A single wall opening in an HDB flat is often a one-day job. A full flat strip-out including floor tiles, bathroom and kitchen typically runs three to five working days. Commercial reinstatement depends on floor area and what has to come out, and we give you a day-by-day programme with the quotation.

Do you clear the debris afterwards?

add
Yes. Debris removal and disposal at licensed facilities is included in our scope unless stated otherwise. We sort waste on site where required, protect common corridors and lifts during removal, and leave the unit swept clean at the end of works.

Get a site survey for your hacking works

Send us your floor plan or a few photos and we will advise what can be hacked, what needs a permit, and how long the works will take.