
apartment Hacking Services
HDB Wall Hacking in Singapore
We confirm what may be hacked, apply for the permit, and carry out the works within approved hours.
Hacking in an HDB flat
HDB flats have a defined approval process for hacking works, and it is stricter than most people expect. Written approval is required before any wall is touched, and several elements can never be altered regardless of what is proposed.
The requirement applies to partial hacking as much as full removal. Forming a doorway in a partition is hacking work and needs the same approval as taking the wall out entirely.
What needs a permit
- Demolishing or partially removing any internal wall
- Forming a new opening, including a doorway or pass-through
- Removing floor tiles and the screed beneath
- Removing wall tiles in bathrooms, kitchens and service yards
- Relocating or altering an internal doorway
Cosmetic work does not need one. The distinction is whether you are removing part of the building or something attached to it.
What HDB will never approve
Four categories are fixed:
- Reinforced concrete walls. They carry load from the floors above.
- Beams, columns and floor slabs. Including cutting into them to run services.
- The household shelter. Walls, floor, ceiling and door are all protected. Nothing may be fixed to them.
- Shared structures. Party walls are common property.
The household shelter causes the most disappointment, because it usually looks like a store room and is often inconveniently placed. It is a civil defence structure, and the restriction extends to drilling a hole for a shelf.
Who submits the application
Only an HDB Registered Renovation Contractor can lodge a renovation permit application. A flat owner cannot submit one directly, and a contractor who is not on the register cannot submit one at all.
Check the registration before engaging anyone. HDB publishes the list of registered renovation contractors, and verifying it takes a minute. Work carried out by an unregistered party is unauthorised however competently it is done.
Professional Engineer endorsement
Where works affect or approach structural elements, HDB requires the application to be endorsed by a Professional Engineer who assesses the proposal and confirms the structure is not compromised.
HDB indicates at application stage whether this applies. The PE charges separately and their availability affects the schedule, so establishing early whether an endorsement is needed avoids a surprise delay.
Permitted hours and the three-day limit
Noisy work is restricted to weekdays, generally 9am to 5pm, and is not allowed on Saturdays, Sundays or public holidays.
Separately, HDB limits demolition and the removal of wall and floor finishes to three consecutive days, and restricts the number of powered hand tools running at any one time. A full strip-out therefore has to be sequenced rather than compressed.
Permit validity
A renovation permit is valid for a fixed period from issue, and the approved works must finish inside it. An overrun needs an extension application rather than simply continuing, so the programme should be planned with some margin.
If work is done without approval
HDB can impose a fine and require the work to be reinstated at the flat owner's expense. Reinstatement typically costs considerably more than the original work, because rebuilding a wall to an acceptable standard is harder than removing one.
The liability sits with the flat owner rather than the contractor. Unauthorised alterations also surface when the flat is sold or inspected, which is a worse moment to deal with them.
For typical market prices across walls, floors, toilets, kitchens, ceilings and disposal, see our hacking price list. For walls specifically, see the wall hacking cost guide.