Skip to content
foundation Wall Hacking.sg

location_on East

Wall Hacking Services in Bedok

Wall and floor hacking for older HDB flats, walk-ups and landed homes across Bedok.

Hacking works in Bedok

Bedok is an older estate and that shapes nearly every job we take here. Flats built in the 1970s and 1980s used solid masonry partitions with a thick cement render finish, so hacking a wall in Bedok is slower and dustier than the same nominal job in Punggol or Sengkang. Owners comparing quotes across towns sometimes ask why a Bedok job prices differently for the same wall length. The honest answer is that there is more material to remove and more debris to carry out.

Older bathrooms and floor works

The most common Bedok request is a full bathroom strip-out. In flats of this vintage the original tiles sit on a thick screed bed, and beneath that the waterproofing is almost always past its useful life. We hack down to the structural slab rather than tiling over, because tiling over an old membrane in a forty-year-old flat is how leaks into the unit below start.

Walk-ups and landed properties

Bedok also has walk-up apartments and landed homes around Kembangan and Siglap. Walk-ups have no service lift, so debris comes down by stairs and the labour component of the job is higher. For landed properties the rules are different again: there is no HDB permit, but structural changes need proper professional endorsement and we will not begin without it.

Estates we cover in Bedok

  • apartment Bedok North
  • apartment Bedok South
  • apartment Chai Chee
  • apartment Kembangan
  • apartment Siglap

info Working in Bedok

Many Bedok blocks date from the 1970s and 1980s. Original wall finishes here often sit on thick cement render, and we allow more hacking time per square metre than we would in a newer town.

Services available in Bedok

Hacking works in Bedok

Do I need HDB approval before hacking a wall?

add
Yes. All hacking of walls in an HDB flat, whether partial or complete, needs written approval from HDB before works begin. This is issued as a renovation permit. Works carried out without a permit can result in a fine and an order to reinstate the wall at your own cost. We apply for the permit on your behalf as part of the job.

Which walls in my flat can be hacked?

add
Non-structural walls can usually be hacked with approval. Structural walls, reinforced concrete walls, columns, beams and household shelters can never be hacked. In most HDB flats the walls around the household shelter and certain internal walls are structural. We confirm which is which from your floor plan before quoting, and flag anything that will not be approved.

What hours can hacking works be carried out?

add
Noisy works such as hacking and heavy drilling are restricted to weekdays, generally 9am to 5pm. They are not permitted on Saturdays, Sundays or public holidays. Quieter renovation work has a wider window. We schedule hacking inside the permitted hours and plan low-noise tasks around them so the job still finishes on time. Check the current hours with HDB or your building management before fixing dates, as the rules are periodically updated.

How long do hacking works usually take?

add
A single wall opening in an HDB flat is often a one-day job. A full flat strip-out including floor tiles, bathroom and kitchen typically runs three to five working days. Commercial reinstatement depends on floor area and what has to come out, and we give you a day-by-day programme with the quotation.

Do you clear the debris afterwards?

add
Yes. Debris removal and disposal at licensed facilities is included in our scope unless stated otherwise. We sort waste on site where required, protect common corridors and lifts during removal, and leave the unit swept clean at the end of works.

Do you work with interior designers and renovation contractors?

add
Regularly. We are often engaged directly by interior design firms and main contractors to handle the hacking and disposal phase before their own works begin. We can work to your programme and coordinate access with the other trades on site.

Get a site survey for your hacking works

Send us your floor plan or a few photos and we will advise what can be hacked, what needs a permit, and how long the works will take.