Skip to content
foundation Wall Hacking.sg

warehouse Reinstatement Services

Industrial and Warehouse Reinstatement in Singapore

Mezzanines, racking and office pods dismantled, with JTC handover requirements met.

Industrial and warehouse reinstatement

Reinstating a factory, warehouse or industrial unit returns it to the condition required by the lease, which for JTC and most industrial landlords means a clear, bare unit with the base structure intact.

The scale is different from commercial reinstatement. Elements are larger, heavier, and more of the work involves mechanical handling rather than hand tools.

Typical scope

  • Mezzanine floors and access stairs
  • Racking systems and their floor fixings
  • Office pods and partitioned areas within the warehouse
  • Suspended ceilings and lighting in office areas
  • Floor coatings, line marking and applied finishes
  • Compressed air lines, process pipework and cable containment
  • Tenant-installed electrical distribution
  • Signage and applied branding

Mezzanines

Mezzanine floors are usually the largest element. Dismantling is sequenced from the top down, with decking removed before the supporting steel, and the steel taken apart in sections that can be handled safely.

Where a mezzanine was installed with approval, that approval may define what reinstatement looks like. Its floor fixings also leave the slab needing making good once removed.

Racking

Racking is bolted to the slab. Removal leaves fixing holes across a large area, and making good the slab is generally part of the scope rather than an extra. Where racking is being retained or sold, dismantling it in reusable condition takes longer than breaking it down.

Floor coatings

Epoxy and resin coatings are removed mechanically, by grinding or shot blasting. It is dusty, slow, and covers a large area, which makes it one of the more significant line items in an industrial reinstatement.

Whether the coating has to come off at all depends on the lease and on whether it was applied by the tenant.

JTC and landlord requirements

JTC premises and most industrial landlords have defined reinstatement standards and an inspection process at handover. These should be obtained at the outset, because they determine the scope more precisely than a general reading of the lease.

Where alterations were approved during the tenancy, the approval documentation usually specifies the reinstatement expected.

Access and handling

Industrial units generally have better access than commercial ones: level loading, roller shutters and room to work. That allows mechanical handling and larger waste containers, which is what makes the volume manageable.

Working at height for mezzanine and high-level services needs appropriate access equipment and planning.

For typical market rates per square foot and worked budgets, see our reinstatement cost guide.

Industrial and Warehouse Reinstatement questions

Do I need HDB approval before hacking a wall?

add
Yes. All hacking of walls in an HDB flat, whether partial or complete, needs written approval from HDB before works begin. This is issued as a renovation permit. Works carried out without a permit can result in a fine and an order to reinstate the wall at your own cost. We apply for the permit on your behalf as part of the job.

Which walls in my flat can be hacked?

add
Non-structural walls can usually be hacked with approval. Structural walls, reinforced concrete walls, columns, beams and household shelters can never be hacked. In most HDB flats the walls around the household shelter and certain internal walls are structural. We confirm which is which from your floor plan before quoting, and flag anything that will not be approved.

What hours can hacking works be carried out?

add
Noisy works such as hacking and heavy drilling are restricted to weekdays, generally 9am to 5pm. They are not permitted on Saturdays, Sundays or public holidays. Quieter renovation work has a wider window. We schedule hacking inside the permitted hours and plan low-noise tasks around them so the job still finishes on time. Check the current hours with HDB or your building management before fixing dates, as the rules are periodically updated.

How long do hacking works usually take?

add
A single wall opening in an HDB flat is often a one-day job. A full flat strip-out including floor tiles, bathroom and kitchen typically runs three to five working days. Commercial reinstatement depends on floor area and what has to come out, and we give you a day-by-day programme with the quotation.

Do you clear the debris afterwards?

add
Yes. Debris removal and disposal at licensed facilities is included in our scope unless stated otherwise. We sort waste on site where required, protect common corridors and lifts during removal, and leave the unit swept clean at the end of works.

Get a site survey for your hacking works

Send us your floor plan or a few photos and we will advise what can be hacked, what needs a permit, and how long the works will take.