HDB Renovation Hours: When Hacking Is and Is Not Allowed
Noisy renovation work is restricted to weekdays, and there is a separate limit on how many consecutive days demolition may run. Both affect how a job has to be scheduled.
Chris Tan
Updated October 2026 2 min read
Two separate restrictions govern when hacking can happen in an HDB flat. Both affect scheduling, and the second one surprises people more than the first.
Noisy work is weekdays only
Noisy work, which includes hacking, demolition, drilling and tile cutting, is restricted to weekdays. It is generally permitted from 9am to 5pm and is not allowed on Saturdays, Sundays or public holidays.
Quieter renovation work has a wider window. The distinction is between work that neighbours can hear through the structure and work that they cannot.
Saturday is the one that causes problems. It is a natural choice for anyone trying to minimise time off work, and it is not available for hacking. Any contractor proposing a weekend hacking session is proposing something that is not permitted, and the flat owner carries the consequence.
The three-day limit
Separately from the hours, HDB limits demolition work and the removal of wall and floor finishes to three consecutive days. There is also a restriction on how many powered hand tools may be running at any one time.
This is the constraint people do not anticipate. It means the noisiest phase of a renovation cannot simply be compressed by putting more people on site. A full strip-out covering walls, floor tiles, bathroom and kitchen has to be sequenced across the programme rather than done in one continuous push.
If a quotation assumes the entire demolition happens in a single block, it is worth asking how that fits the limit.
Why the rules exist
HDB blocks transmit noise efficiently through the structure. Hacking is heard several units away and on floors above and below, not just next door. The restrictions exist because the alternative is a block where renovation noise is effectively continuous.
This is also why complaints are common even when a contractor is working entirely within permitted hours. Working inside the rules protects you from enforcement, but it does not make the noise inaudible.
Telling your neighbours
Not a rule, but it prevents more complaints than anything else. A note to the units either side, above and below, saying what is happening and roughly when the noisy phase falls, costs nothing.
Neighbours who know a three-day hacking phase is coming tend to tolerate it. Neighbours who hear it start without warning tend to call the town council.
Condominiums are different, often stricter
In a private condominium the MCST sets the hours, and they are frequently narrower than the statutory position. Some developments prohibit renovation work entirely on weekends and public holidays. Some restrict it to specific hours on weekdays only.
Obtain the specific rules for your development before planning the programme, rather than assuming HDB's hours apply.
The hours, in short
According to HDB's renovation guidelines, noisy works such as hacking, drilling, tile cutting and wall demolition are allowed from 9am to 5pm on weekdays only, and not on Saturdays, Sundays, public holidays or the eve of major public holidays. These hours shape every hacking programme, and they are one reason the cost of wall hacking depends on planning as much as on the wall itself.
Confirm before committing
These rules are revised from time to time. Before fixing dates with a contractor, confirm the current permitted hours with HDB or your building management. It is a short check that avoids a scheduling problem after work has been booked.
Chris Tan
Site Supervisor
Chris supervises hacking and strip-out works on HDB and BTO sites across Singapore. He handles permit submissions and coordinates with town councils on renovation hours and debris removal.


