Skip to content
foundation Wall Hacking.sg
Hacking Guides

What To Expect When Hacking a Brick Wall in Singapore

Hacking a brick wall is common in Singapore. It takes 1 to 3 days, and prices start from $500. Check rules for your flat. Learn how it works.

J

Jun Wei

6 min read

Brick wall hacking in a Singapore home

Hacking a brick wall in Singapore takes 1 to 3 days. It costs from $500 and upwards. Size, thickness, and location decide the exact time and price. You may also need a demolition permit for condos, landed homes, or offices.

What’s the process for hacking a brick wall?

Brick walls are usually structural. That means they need a different approach to non-structural walls. First, you’ll have to confirm what’s in or behind it. Check our post on how to check for pipes and wires before starting.

For small areas or repairs, we use a hammer and chisel. For a full opening, we start with a drill to mark the area. Then we go in with a jackhammer or ring saw, extract the bricks, and clear the debris. We’ll also check with you about reusing any bricks. Even if we don’t, a disposal fee still applies.

Once the wall is down, we’ll cover the exposed area to keep out dust and rain. Then we’ll hand over to your contractor for the next stage. If you’re doing the whole job in one go, we’ll finish with reinstatement and cleaning.

What rules apply to hacking a brick wall?

HDB and condo walls follow the same rules. You’ll have to check if the wall is a load-bearing wall or a partition. Load-bearing walls usually can’t be hacked fully. Partitions or walls between rooms can, but only up to 2 metres from the floor. And you can’t hack walls in your household shelter. That’s an HDB rule. Read more in our post on the HDB household shelter.

Condo owners and landlords may need the demolition permit. Tenants must check that the work they want is allowed under their tenancy agreement. We always recommend getting this in writing from your landlord.

How much does hacking a brick wall cost?

You’ll pay from $500 to $2,500. The main factors are the wall’s size and thickness. Each side of an average interior partition wall is 10cm thick. Load-bearing walls are 20cm thick. Hacking starts from $300 to $500 for small sections, and rises with the wall’s size. The fee for removing and disposing of the rubble is up to $400, depending on whether you’re in an HDB, condo or landed property.

You’ll also need to factor in the cost of reinstatement. Depending on your contractor’s design, the cost will vary. If you open the kitchen into the living room, for example, every other opening would need to be closed up, or given soundproofing. And you might also need to pay a cleaning fee, if the hacking has spread dust or debris beyond the work area.

A permit won’t cost you, if we’re making the application. But a new wall would. It’s not cheap, but it’s not optional. Escape routes and load-bearing walls are vital. If you’d like to knock down a load-bearing wall, you’re looking at a full structural redesign. That’s not something you should do yourself. It’s best to check with the authorities first. And if you’re in any doubt, the safest option is to leave it alone.

Do you need a demolition permit to hack a brick wall?

You won’t need one for an interior wall between rooms. You do need a permit to hack a brick wall if it touches the exterior. Even then, you can’t change the external look. That’s an HDB or URA rule. Some condos have their own rule books, so check with your MCST too. Landed homes would normally need a permit. We’d help you with that, as part of the service.

Can a tenant hack a brick wall? Can a landlord refuse?

If you’re a tenant, the short answer is that depends on your landlord. Hacking a wall is a permanent change. So if you’ve agreed to reinstate the property at the end of your tenancy, or to hand it back with no changes, then you’ll need to pay for restoration. Some landlords will approve the hacking if you take that option. Others may say no, and want to keep the wall intact. So you’ll have to check.

If you’re a landlord, you can refuse the tenant’s request. Most tenants will ask in writing, before they make a renovation plan. If it will damage the structure or the external design, or if you think it’s an investment risk, then you might want to say no. Some landlords say yes, but charge the tenant in advance for reinstatement.

What if you’re unsure about hacking a brick wall?

The obvious thing to do is call a wall hacking contractor and ask. We can’t just knock down a wall in the wrong place or one that’s too important to the building. We’ll always make sure what’s safe, and whether it’s worth the cost.

Brick walls were common in older properties, but there are also brick walls in modern homes, with floor tiles inside. If you’re unsure, whether as a tenant, landlord, or owner, the best thing to do is to ask a specialist.

Common questions

Question: How long does it take to hack a brick wall in Singapore?

Most jobs take 1 to 3 days. That’s depending on the wall’s size, thickness, and location. It also depends on whether you’re just opening a small section, or breaking it down fully. Hacking a whole load-bearing wall isn’t a common thing. It’s a big job. If you’re not sure, your contractor can tell you.

Question: What happens if you hack a load-bearing wall?

You’ll have to reinforce the building’s structure everywhere the wall was holding it up. The cost starts from $50,000, and goes up. It’s also not a DIY project. You’ll need a full team of architects, engineers, and contractors. That’s why we always recommend checking with the HDB or your MCST, if you’re in a condo. The best rule is that if the wall feels like it’s holding up the building, it probably is.

Question: Can you hack a brick wall in an HDB?

Yes. But it needs to be an interior partition. You can’t change the external design. Hacking a whole load-bearing wall would need a permit and a structural redesign.

Question: Can you hack a brick wall in a condo?

Yes, like in an HDB. Some condos have their own rules, so check with the MCST. And you’ll need a permit if the wall touches the outside.

Get a site survey for your hacking works

Send us your floor plan or a few photos and we will advise what can be hacked, what needs a permit, and how long the works will take.